How to check your PC specs

Find your processor, RAM, graphics card, storage type and virtualization status on Windows 10 or 11. Takes about a minute.

Step 1: Processor and RAM

  1. Press Windows + I to open Settings.
  2. Go to System → About (scroll to the bottom of the System page).
  3. Under Device specifications, note the Processor (e.g. "Intel Core i5-8250U") and Installed RAM (e.g. "8.00 GB").

Step 2: Graphics, storage and VT

  1. Press Ctrl + Shift + Esc to open Task Manager. If it opens small, click More details.
  2. Open the Performance tab.
  3. Click CPU. At the bottom right, look for Virtualization: Enabled / Disabled. Also note Logical processors (threads).
  4. Click GPU 0 (and GPU 1 if present). The name at the top right is your graphics card. Names with NVIDIA GeForce or AMD Radeon RX are dedicated, while Intel UHD/Iris or AMD Radeon Graphics are built-in.
  5. Click Disk 0. The type (SSD or HDD) is shown at the top right.

Which CPU group am I in?

Group in the Emulator FinderExamples
Celeron / Pentium / Athlon / old i3Celeron N4020, Pentium Silver, Athlon 3000G, Core i3 (4th–7th gen)
Core i3 (newer) / i5 / Ryzen 3–5Core i3-10100, i5-8250U, i5-10400, Ryzen 3 3200G, Ryzen 5 5500U
Core i7 / i9 / Ryzen 7–9Core i7-10750H, i5-12450H, Ryzen 7 5800H, Ryzen 9

The generation is the first digit(s) after the dash: i5-8250U is 8th gen, i5-12450H is 12th gen.

Virtualization says "Disabled"? Follow our VT guide. It's the single biggest performance boost for most emulators.